IEC60898-1 Circuit Breaker Terminal Performance Automatic Test Equipment

System Overview
The terminal performance test equipment is manufactured in accordance with the relevant requirements of IEC60898-1, IEC60947-1, and UL486E standards, to examine whether screw-type terminals and screwless terminals can be used normally. Mainly used to judge the type of judgment ability. Whether the design and structure of the terminal block meets the requirement of disconnection when the wire is moving, it can also be used to verify the looseness and damage of the connection line of the wire terminal.

The rope transmission device test of this equipment adopts PLC control and 7-inch color man-machine interface operation. The motor-driven turntable mechanism is in accordance with the standard requirements. The rotating wire rotates at a speed of 10r/min±2r/min. The wire rotates at an eccentricity of 37.5mm. The structure does not need to be installed, and the machine will stop automatically when the power is used up to the set number of times, which is convenient to operate, practical and beautiful.

Equipment principle

The motor-driven turntable mechanism drives the wire to rotate at an eccentricity of 37.5mm (diameter 75mm) at a rate of 10r/min±2 r/min in accordance with the standard requirements for bending action, hang the corresponding weight on the wire to be tested.

Overview of the test process
1. According to the requirements of the table, select the bushing and weight that match the sample. For 4mm² line, select the bushing with 9.5 inner hole and 0.9kg weight.
2. Clamping the sample: Place the terminal in the clamp, adjust the left and right position of the clamp (through the X-axis adjustment mechanism) and the front and back position of the turntable (through the Y-axis adjustment mechanism), so that the vertical position of the sample terminal is aligned with the center of the turntable. Note: The circuit breaker is installed on the back plate with guide rails.
3. The sample passes through the selected bushing, the selected weight is hung on the free end of the sample, and then the Z-axis adjustment mechanism is adjusted upward to the required height of the test, and the weight tray is lowered by the lifting mechanism to make the test Like to withstand the pulling force of the weight.
4. Start the test, the device will rotate the wire at the set speed, and it will stop automatically when the set number of times is reached.
5. Determine whether the sample is qualified or not in accordance with the standard requirements.

Main Technical Parameter

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo  products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment,  automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.